iSafe Pro®, the friendly, patent-protected entry control solution, suitable for residential and commercial properties alike. Based on advanced RFID (Radio Frequency Identification) technology, the iSafe Pro can be used as a standalone offline or online via wired transmission using RS485 (2 wire bus) system requiring no complex computer infrastructure - simple to install and easy to use.

 

The iSafe Pro uses electronic tags with virtually undecipherable code combinations, easily programmed with Internet-based software. To enter, a user presents the tag to the electronic reader installed at the entrance, which identifies the code and sends a signal that unlocks the door. When a tag is lost, its code is simply deleted from the system, and a new tag is readily produced.

 

TECHNOLOGY

 

Administration of badges, access rights, events and other data through an internet connection using Explorer and transmission of data by encoding in the badges or by wired transmission using RS485 (2-wire bus).

 

• Encoding badges with an encoder connected to the PC via USB.
• Badges with read-write protection using A and B encryption keys (Mifare ISO 14443/A technology).
• Access rights with loss indicators by dating: the date of a new badge causes previous badges for the same user to be invalidated.
• Data stored in a MySQL database on a server protected with 128-bit SSL encryption.

 

Each door is fitted with a badge reader using Mifare technology connected to an ACU (control unit), the ACU is then connected to a 12V DC power supply.

 

 

OPERATION

 

The following information is entered into the iSafe Pro software:

 

• Specifying Local time zone (GMT), date, time and daylight saving time shifts.
• Creating user groups (up to 64 groups per site).
• Creating weekly timetable menus (up to 16 menus per site with two time periods per day for each day of the week).
• Creating doors (up to 65000 doors per site with no limit on number of sites).
• Encoding badges (up to 125000 per site) with allocation of a group to each badge, validity time & date limit and optional "My Door" feature.

 

Unit controls (ACU) are configured at start by presenting a configuration/service badge in front of each reader to transfer the following elements to it:

 

• Site code
• Time zone and daylight saving time shifts
• Door number
• Authorized user groups associated with timetable menus (for each group, one timetable menu from among the 16 possible menus)

 

 

Event management:

 

• 5000 events recorded by the control unit in FIFO mode
• Transfer to PC by Service badge (by groups of 400) or by RS485
• The database can be exported to Excel format

 

ADVANTAGES

 

Scheduling updates are made both by the badges (a new badge deletes the old one once it is presented to the door) Or by the RS485 bus. It is therefore possible to have doors connected to the management PC by the RS485 bus while others are managed in disconnected mode by the badges.

 

Timetables are allocated to groups individually for each door. The same badge can hence be authorized for each door according to different timetables (permanent access for the parking lot, from 8:00 to 17:00 for the work area and from 11:00 to 14:00 for the cafeteria). If the timetables for a group of people are to be changed, all that is required is to take action on the door in question, with the change being affected for the entire group.

 

UPCOMING FEATURES

 

• The option to specify main door and secondary doors; employees will need to go through the main door first to validate their tag in order to gain access to secondary doors. A time stamp allows automatic cancellation of a lost badge on all doors through the main door.
• A PLC version which will communicate on the existing electric grid without wiring and will include a door lock power supply.
• A fingerprint reader will be integrated in our reader to check tag user identity; this will give an added layer of security for more security sensitive applications.

 

TECHNICAL SPECIFICATIONS

 

Reader:

 

• Mifare 13.56 MHz
  Electronic drowned in epoxy resin IP 65
  Green and red two-tone Led
  Connection by 4 wire cable, default length 2M.
  Dimensions : 148x44x15 mm
  Weight : 110 G
  Badge : Standard Mifare format card or key Fob (dimension 60x30x5 mm)

 

Control unit:

 

Mifare 13.56 MHz
Power supply 12 Vdc 1A
Data safeguarded in EEPROM
Ports RS232, RS485, Alarm I/O
Relay opening: breaking capacity 5A 250 Vdc
Buzzer, leds, buttons reset and parameter setting
Dimensions : 85x65x25mm

• Weight: 90 G

 

Pricing and product availability can be obtained from our knowledgeable product providers and resellers. Call us to find product providers and resellers in your area.

To view iSafe PRO Datasheet, Please press here

 

To view iSafe PRO Slideshow Presentation, Please press here